About Us Company Divisions Enquiry Contact Information
Pressed Steel Sectional Water Storage Tank
  Features and Components Specifications:

  Panels:
Material Specification:
Hot rolled steel plate conformed to the requirement of
BS 4360 grade 43A, BS 1449 material HR 14 or ISO equivalents.
SS 316 Hot rolled stainless steel plate (No.1 finishing).
  Flangs of plate:
Combined double flanges at an angle of 45 & 90 degree to the face of the plate on all four sides.
  Bolt holes:
1.5mm of ole clearance in diameter for bolt having a minimum diameter of 14mm (M14) or up to 16mm (M16). Bolt holes spacing of not exceeding 76.2mm pitch.
  Tank details:
 Pressed Steel Water Tank
  Features
  Weight tables
  Tank Installations
 Reinforcement System
 Steel skid base & Foundation
  Normal Thickness of unit plate:

1220 mm x 1220 mm Tank Height 1220 mm 2440 mm 3660 mm 4880 mm  
Bottom Panels 5 mm 5 mm 5 mm 6 mm
1st Tier Panels 5 mm 5 mm 5 mm 6 mm
1st Tier Panels   5 mm 5 mm 5 mm
1st Tier Panels     5 mm 5 mm
1st Tier Panels       5 mm
1st Tier Panels 1.5 mm
1000mm x 1000 mm Tank height 1000 mm 2000 mm 3000 mm 4000 mm 5000 mm
Bottom Panels 5 mm 5 mm 5 mm 5 mm 6 mm
1st Tier Panels 5 mm 5 mm 5 mm 5 mm 6 mm
1st Tier Panels   5 mm 5 mm 5 mm 5 mm
1st Tier Panels     5 mm 5 mm 5 mm
1st Tier Panels       5 mm 5 mm
1st Tier Panels         5 mm
Top Cover Panels
(Pitch/ Flat)		 1.5/2 mm 1.5/2 mm 1.5/2 mm 1.5/2 mm 1.5/2 mm
  Free boards, Stays, Cleats & Pads for Connection:
Material Specification: Hot rolled steel plate conformed to the requirement of
BS 4360 grade 43A, BS 1449 material HR 14 or ISO equivalents.
  Bolts, Studs, Nuts & Washers:
Material Specification: Complied with the requirement of BS4190 or ISO 898.
Dimension Specification: M14 (M16 is available upon request).
  Jointing Material: Non-Toxic
  Cover: Manufactured to conform to the requirements of BS449.
  Access Ladder: Will be provided for all tanks depth over 1000mm.
  Water Level Indicator: Standard supply with graduated mark in feet or meters.
  Coating finished (Two Choices):
  1. One coat of Non-toxic priming coating on delivery of panels of prior to erection.
  2. Hot dip galvanizing to BS 729.
  3.

 SS316 stainless steel sectional tank with No. 1 Finishing available upon request in
(1220mmx 1220mm x 3mm) and (1000mm x 1000mm x 3mm) dimension.
  4. HDPE lining (internal).